Failure to do so can cause severe damage to both the motherboard and the components. The following sub-sections describe the slots and the expansion cards that they support. After changing or clearing the BIOS passwords, remember to reset the jumper to pins Failure to do so may cause you physical injury and damage motherboard components. Line In port light blue. Enter text from picture: Got it, continue to print.

Uploader: Kajisar
Date Added: 12 December 2007
File Size: 70.31 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 34926
Price: Free* [*Free Regsitration Required]

One 9-pin audio header for headphone-out and microphone-in yellow, Vista capable, requires matching front audio jack module.

ASUS IPIBL-LA (BERKELEY-GL8E) Motherboard (DDRMHz) Memory I Motherboard Series

Expansion slots In the future, you may need to install expansion cards. Configuring an expansion card After installing the expansion card, configure it by adjusting the software settings. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5.


HP and Compaq Desktop PCs – Motherboard Specifications, IPIBL-LA (Berkeley)

Connect the chassis power LED cable to this connector. Table of Contents Add to my manuals Add.

The Virtual Agent is currently unavailable. Close the load plate Athen push the load lever B until it snaps into the retention tab. Motherboard description Manufacturer’s motherboard name: Plug the power cord and turn ON the computer. If you are using any other operating systems, disable the Hyper-Threading Techonology item in the BIOS to ensure system stability and performance.

Comments to this Manuals Your Name. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. Removing the cap will cause system boot failure!

Internal connectors This section describes and illustrates the internal connectors on the motherboard. Turn OFF the computer and unplug the power cord. Retention tab PnP cap Load lever This side of the socket box should face you.

The figure shows a network card installed on the PCI Express x1 slot. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the gl8f. Don’t have an account?


This header is used during manufacturing and testing. Processor upgrade information Socket type: Integrated graphics using Intel GMA The figure shows a graphics card installed on the PCI Express x16 slot. Keep the screw for later use.

How does HP install software and gather data?

Suspicious Activity Detected

Do not change any jumper setting while the computer is on. Press the load lever with your thumb Athen move it to the left B until it is released from the retention tab.

Locate the CPU socket on the motherboard. These are not jumpers! System Panel Connector Remove the bracket opposite the slot that you intend to use.

Javascript is disabled in this browser. Line In port light blue.